Print

Home Modifications

Home Modifications

Riverina Scooters and Mobility stock a large range of products for major and minor Home Modifications including access ramps and hand rails. For ramps, please see the Ramps tab. We stock the Canterbury Concepts modular rail systems, as well as stainless steel grab rails.

Display per page
Sort by

A tough plastic brick for raising beds and chairs, for easier access. Lifts the furniture 100mm. The 40mm raiser can be placed on top of the 100mm. Sold individually at $10 each.

dva     

$10.00

A tough plastic brick for raising beds and chairs, for easier access. Lifts the furniture 40mm. Can be stacked on each other, or on the 100mm raiser. Sold individually at $8 each.

dva     

$8.00

A lightweight, strong, plastic tap turner designed to fit most plastic moulded taps. It adjusts to fit taps up to 60mm in diameter and may be left in position or removed for use on different taps. The tap turner is adjusted by pulling out the spring loaded jaw, which is then locked in place with a sliding lock. The tap turner could also be used to turn stove knobs and washing machine knobs. Two self adhesive foam pads are supplied for permanent installation if desired. 

$22.50

Canterbury Concepts grab rails. Available in 300mm, 450mm, 600mm and 900mm. Secure to your wall studs in your bathroom or around your home. Finished in Satin stainless steel.

 

$30.00

Chrome plated with 2 metre interlocking metal hose - suits all water pressures.

$75.00

Cradled on pin at water outlet - no drilling required. Comes with additional bracket.

$75.00

Canterbury concept's rails are manufactured from 32mm aluminium, and are extruded from their own design and specifications and include a ribbed design to prevent twisting of the rail in the user's hand. Rails are slip resistant to maximise grip and optimise safety. Ripple finish.

$30.00

Canterbury concept's rails are manufactured from 32mm aluminium, and are extruded from their own design and specifications and include a ribbed design to prevent twisting of the rail in the user's hand. Rails are slip resistant to maximise grip and optimise safety. Textured finish.

$30.00

Adjustable tube connector work on the same principles as the beach umbrella and allow rails to be connected at angles up to 45 degrees up or down. Fixed to wall using Large Wall Bracket. Packaged together, 1 x Adjustable Tube Connector and 1x Large Wall Bracket.

$36.50

Use a GR03W to connect a vertical rail to a horizontal rail often used for the mounting of a shower slide (SS) and shower handset

$30.00

2 way fitting, 45 degree bend.

$26.00

2 way fitting, 90 degree bend.

$26.00

 

2 way connector, 30 Degree Bend and Wall bracket.  Allows for 270 degree hand travel required by Australian Standards. Package includes wall bracket large, and modified dress rings to allow the cup of the bracket to be located anywhere beneath the bend of the rail. This means the bracket can be fixed at a secure point.  

 

$25.00

2 way connector, 45 Degree Bend and Wall bracket.  Allows for 270 degree hand travel required by Australian Standards. Package includes wall bracket large, and modified dress rings to allow the cup of the bracket to be located anywhere beneath the bend of the rail. This means the bracket can be fixed at a secure point.  

$25.00

Shower Slide cradles a handset and hose, attaches to a vertical grabrail, and is adjustable to allow travel up and down the rail.

$25.00

Two way internal corner fitting that is used to install rails into an internal corner.

$25.00

Multipoint endsets have 7 fixing holes, allowing the rail to be installed at almost any angle and still be securely fixed to a stud.

$25.00

Full base endsets are used for a standard rail configuration on an open wall to allow fixing studs

$21.00

Slimline endsets are used for architrave mounting

$21.00

Corner endsets are used for mounting when the rail runs into a corner

$21.00

Corner endsets for mounting when both ends of the rail are in corners

$21.00

Toilet roll holder fixes to a grabrail or to a wall (both fixings are supplied)

$18.00

'T' piece connector to extend the length of a rail

$15.00

Allows for 270 degree hand travel per the Australian Standards. Support for the studreach grabrails longer than 1,000mm. This means that all spans shall be less than 1000mm.

$15.00

Use an E90 connector in conjunction with a large wall bracket (WBL) to go around corners.

$13.00

Plug end ball, used in lift away rails and drop down support leg.

$12.00

Connects pipe bend rail for added lateral support. Also used to connect rails to each other at 90 degree for support

$11.00

Finish a rail at 90 degree to wall or floor. The LER can be used for rails extending from floor to ceiling, or with Pipe Bend (PB) and connecting (CR) for added lateral support to vertical rails.

$11.00

Small end ring support a rail that butts straight into the wall.

$7.50

Gravity toggles (or cavity fasteners) clamp the toggle behind the wall material, allowing a larger disbursement of the load on the fixing, which in turn ensures a stronger fixing. Toggle dimensions 80mm x 18mm x 15mm.

$7.00

Gravity toggles (or cavity fasteners) clamp the toggle behind the wall material, allowing a larger disbursement of the load on the fixing, which in turn ensures a stronger fixing. Toggle dimensions 80mm x 12mm x 10mm.

$7.00

Use the base ring as a packer for tiled and un level surfaces (7 mm).

$4.00

Tube connector, connects two rails together in a straight line for a longer continuous run of rail.

$4.00

Plug end, used in lift away rails and drop down support leg.

$2.50