Print

Home Modifications

Home Modifications

Riverina Scooters and Mobility stock a large range of products for major and minor Home Modifications including access ramps and hand rails. For ramps, please see the Ramps tab. We stock the Canterbury Concepts modular rail systems, as well as stainless steel grab rails.

Display per page
Sort by
1 - 30 of 35 results

Canterbury Concepts Rail, Ripple finish 1500mm (FUT1500)

Canterbury concept's rails are manufactured from 32mm aluminium, and are extruded from their own design and specifications and include a ribbed design to prevent twisting of the rail in the user's hand. Rails are slip resistant to maximise grip and optimise safety. Ripple finish.

$30.00

Canterbury Concepts Rail, Textured finish 1500mm (GRO1500)

Canterbury concept's rails are manufactured from 32mm aluminium, and are extruded from their own design and specifications and include a ribbed design to prevent twisting of the rail in the user's hand. Rails are slip resistant to maximise grip and optimise safety. Textured finish.

$30.00

Canterbury Concepts Adjustable Tube Connector and Large Wall Bracket (ATC&WBL)

Adjustable tube connector work on the same principles as the beach umbrella and allow rails to be connected at angles up to 45 degrees up or down. Fixed to wall using Large Wall Bracket. Packaged together, 1 x Adjustable Tube Connector and 1x Large Wall Bracket.

$36.50

Canterbury Concepts 3 Way Connector (GR03)

Use a GR03W to connect a vertical rail to a horizontal rail often used for the mounting of a shower slide (SS) and shower handset

$30.00

Canterbury Concepts 2 way fitting, 45 degree bend (GRO2/45)

2 way fitting, 45 degree bend.

$26.00

Canterbury Concepts 2 way fitting, 90 degree bend (GR02/90)

2 way fitting, 90 degree bend.

$26.00

Canterbury Concepts 2 way connector, 30 Degree Bend and Wall bracket (E30&WBL)

 

2 way connector, 30 Degree Bend and Wall bracket.  Allows for 270 degree hand travel required by Australian Standards. Package includes wall bracket large, and modified dress rings to allow the cup of the bracket to be located anywhere beneath the bend of the rail. This means the bracket can be fixed at a secure point.  

 

$25.00

Canterbury Concepts 2 way connector, 45 Degree Bend and Wall bracket (E45&WBL)

2 way connector, 45 Degree Bend and Wall bracket.  Allows for 270 degree hand travel required by Australian Standards. Package includes wall bracket large, and modified dress rings to allow the cup of the bracket to be located anywhere beneath the bend of the rail. This means the bracket can be fixed at a secure point.  

$25.00

Canterbury Concepts Shower Slide (SS)

Shower Slide cradles a handset and hose, attaches to a vertical grabrail, and is adjustable to allow travel up and down the rail.

$25.00

Canterbury Concepts Internal Corner Connector (GROCD)

Two way internal corner fitting that is used to install rails into an internal corner.

$25.00

Canterbury Concepts Multipoint Endset (MP)

Multipoint endsets have 7 fixing holes, allowing the rail to be installed at almost any angle and still be securely fixed to a stud.

$25.00

Canterbury Concepts Full Base Endset (GR01)

Full base endsets are used for a standard rail configuration on an open wall to allow fixing studs

$21.00

Canterbury Concepts Slimline Endset (GR01SL)

Slimline endsets are used for architrave mounting

$21.00

Canterbury Concepts Corner Endset (GR0C)

Corner endsets are used for mounting when the rail runs into a corner

$21.00

Canterbury Concepts Corner Endset (GR0C2)

Corner endsets for mounting when both ends of the rail are in corners

$21.00

Canterbury Concepts Toilet Roll Holder (TRH)

Toilet roll holder fixes to a grabrail or to a wall (both fixings are supplied)

$18.00

Canterbury Concepts T-Piece (GR02)

'T' piece connector to extend the length of a rail

$15.00

Canterbury Concepts Large Wall Bracket (WBL)

Allows for 270 degree hand travel per the Australian Standards. Support for the studreach grabrails longer than 1,000mm. This means that all spans shall be less than 1000mm.

$15.00

Canterbury Concepts 2 way connector 90 degree bend (E90)

Use an E90 connector in conjunction with a large wall bracket (WBL) to go around corners.

$13.00

Canterbury Concepts Plug End Ball (PEB)

Plug end ball, used in lift away rails and drop down support leg.

$12.00

Canterbury Concepts Hand Set and hose (HH)

Chrome plated with 2 metre interlocking metal hose - suits all water pressures.

$75.00

Canterbury Concepts Connector Ring (CR)

Connects pipe bend rail for added lateral support. Also used to connect rails to each other at 90 degree for support

$11.00

Canterbury Concepts Hospital Range Handset and Hose (HRHH)

Cradled on pin at water outlet - no drilling required. Comes with additional bracket.

$75.00

Canterbury Concepts Large End Ring (LER)

Finish a rail at 90 degree to wall or floor. The LER can be used for rails extending from floor to ceiling, or with Pipe Bend (PB) and connecting (CR) for added lateral support to vertical rails.

$11.00

Canterbury Concepts Small End Ring (ER)

Small end ring support a rail that butts straight into the wall.

$7.50

Canterbury Concepts Large Gravity Toggle (GTL)

Gravity toggles (or cavity fasteners) clamp the toggle behind the wall material, allowing a larger disbursement of the load on the fixing, which in turn ensures a stronger fixing. Toggle dimensions 80mm x 18mm x 15mm.

$7.00

Canterbury Concepts Small Gravity Toggle (GTS)

Gravity toggles (or cavity fasteners) clamp the toggle behind the wall material, allowing a larger disbursement of the load on the fixing, which in turn ensures a stronger fixing. Toggle dimensions 80mm x 12mm x 10mm.

$7.00

Canterbury Concepts Base Ring (BR)

Use the base ring as a packer for tiled and un level surfaces (7 mm).

$4.00

Canterbury Concepts Tube Connector (TC)

Tube connector, connects two rails together in a straight line for a longer continuous run of rail.

$4.00
1 - 30 of 35 results